- Joined
- 21 Feb 2005
- Messages
- 3
- Reaction score
- 0
- Country
Got one of those 1950s chrome towel rails with an iron radiator in the middle. It's still got the original pipe connectors screwed in, and I can't find anything that will let me connect them to 15mm pipe. And I can't get the connectors out.
The open end of the connector is like a union connector or the fittings you get to attach a radiator to a valve - a large nut and a flange. The nut's internal diameter is 1 1/4 inch, and the internal diameter of the flange is 3/4 inch. Is there anything that will hook up to this wierd nut and allow me to fit a normal fitting? It's a problem because I can't put the bathroom floor down until this towel rail is in.
Cheers
Dan
The open end of the connector is like a union connector or the fittings you get to attach a radiator to a valve - a large nut and a flange. The nut's internal diameter is 1 1/4 inch, and the internal diameter of the flange is 3/4 inch. Is there anything that will hook up to this wierd nut and allow me to fit a normal fitting? It's a problem because I can't put the bathroom floor down until this towel rail is in.
Cheers
Dan