Omnicron 6000/7000 Touch-pad failure

[Escafeld]

It's a 4-zone 6000 (upgraded by factory to 7000 many years ago so receipt says), and AZ Tech 120 bell box.
De-activated it as usual one morning, came to set it before bed and the touch pad neither beeps or responds. It's been fine for years, battery ok, all PIRs blinking, bell-box blinking. Panel fault probable? Just a thought- I have scaffolding up at mo and have been washing down windows, possible that spray might have got into bell-box.

 

[sparkymarka]

I’ve binned better panels …just replace it as it’s got to be 25 years old ..

 

[Escafeld]

Yes, it was installed in 1991, but what shall I replace with, I just need a basic 4-way panel.

 

[sparkymarka]

You don’t have much choice anymore ….texecom Veritas , the full size is better than the compact version as you can fit a larger battery , have you checked the internal speaker ? If it’s blown then you won’t get any bleeps from the keypad

 

[sparkymarka]

Rough cost ( alert electrical )

 

[Escafeld]

Whatever I press, no other leds light (other than usual mains and day showing) which is why I think it's other than speaker.

Thanks for the recommendation.