Right, at work I've got a Ecoflam P35 Maior burner that runs with a Suntec pump, which has failed on the solenoid. I've taken the coil off, and the pump still passes oil, so the pin/ spring has jammed open. put a new pump on, ran ok for a couple of fire ups, then does the same thing. Had another in the stores, fitted it, then same again!! All the replacement pumps were bought in the last 6 months. So............. tried to look for an alternative (Danfoss) pump, only to be told they don't produce commercial pumps anymore, but are happy to have all the info on their website to suggest otherwise. B*gg*r !!
Any (useful) suggestions guys?? Or is it a case of bad luck three times?!!
Any (useful) suggestions guys?? Or is it a case of bad luck three times?!!