Open vented HW problems

[gassafeman]

Upon looking at the pic, it must have been taken at an angle. The c/f & o/v are critical to my understaing of what is happening.

Im unable to see the new pic(s). Tonybhoy has hit the nail on the head.

Paul.

 

[Al-Glasgow]

To be honest, the flowrate at kitchwn HW is very poor, Ive tried blowing mains up to the cylinder with only a slight improvement that lasts a few days only.


I agree with the draw off, nothing is level, potential for airlock must be huge.


where so I start to rectify, maybe replace draw off with tee for HW and formed bend up to vent ?.

The CF to cylinder must be photo where the back wall is scorched.

Al