Hi,
My neighbor is soon to go away this evening but her house alarm has just started to go off.
She didnt even know it worked so doesnt even know the pin number.
Ive popped the alarm control unit cover off where the internal siren started to sound.
I have removed the mains fuse which has 90 silenced the bell box etc outside on the wall.
I have also pulled the red wire off the battery which lives inside this control box.
There is a slight noise still from outside but can you advise how to clear the memory & insert a new pin etc
If you need a photo of the pcb to show this isnt me trying to break in then no problem etc.
Thanks
My neighbor is soon to go away this evening but her house alarm has just started to go off.
She didnt even know it worked so doesnt even know the pin number.
Ive popped the alarm control unit cover off where the internal siren started to sound.
I have removed the mains fuse which has 90 silenced the bell box etc outside on the wall.
I have also pulled the red wire off the battery which lives inside this control box.
There is a slight noise still from outside but can you advise how to clear the memory & insert a new pin etc
If you need a photo of the pcb to show this isnt me trying to break in then no problem etc.
Thanks
