- Joined
- 13 Feb 2011
- Messages
- 31
- Reaction score
- 0
- Country
I've got my worktops cut, oil has arrived and a couple of old shirts ready to oil.
The oil is at the house I'm doing up so was looking to get some advice on how i'd go about it, how long between each coats. Heres what i think so far/:
oil one side and edges
leave for a few hours then turn
oil other side
sand with thin paper
turn
oil
hopefuly with the osmo 2 or 3 coats sounds like thats all that will be needed
would anyone do it differently
The oil is at the house I'm doing up so was looking to get some advice on how i'd go about it, how long between each coats. Heres what i think so far/:
oil one side and edges
leave for a few hours then turn
oil other side
sand with thin paper
turn
oil
hopefuly with the osmo 2 or 3 coats sounds like thats all that will be needed
would anyone do it differently