Outside hose fitting

[Neil Carroll]

I've bought an outside hose kit, it's exactly what it said it would be ( not suitable for pressure washers) I imagine this is due to the self cutting tap that has the same pressure as my late 40s bladder, I've bought a 15 mm Tee compression to replace it, however I can't find a 3/4 male ( washing machine type hose connector) to a female 15mm connector to join the tee to the washing machine hose, I'm not up for soldering so it will need to be compression, is there a way round this or does anyone know where you can get these,


Thanks

 

[flameport]

If you want to install a T and connect a washing machine hose to it, then it's this: https://www.screwfix.com/p/pegler-compression-washing-machine-valve-tee-15mm-x-15mm-x-3-4-/76344

If you have a T already and want to connect a washing machine hose, then it's a short piece of 15mm pipe and this: https://www.screwfix.com/p/pegler-compression-washing-machine-valve-15mm-x-3-4-/25555

 

[Neil Carroll]

I had a look at the top one in the shop and due to the cut off tap the flow only comes through a small hole that isn't much bigger than the self cutting tap that came with the kit do you think this is sufficient for a pressure washer?

 

[flameport]

Probably not, but pressure washers and outside taps are not normally supplied through a washing machine hose.