Outside plug for Granny Charger.

If you haven't bought one yet, I find the Crabtree outdoor socket particularly good quality.
 
Hi again, I was wanting this outside socket for the granny charger to be isolated, I was thinking of a switch fused spur.
As I said in my first post I can come from an inside socket just on the other side of the wall.

Can I power the outside socket from the switched fused spur or direct from the inside socket ?

I want to cut the power from the outside EV socket but still be able to have power to my inside socket.

(hope that makes sense lol)

Thank you.
 
I think you have missed the point being made. I will look right and left and cross the road, but would not take a chair with me and sit in the middle of the road.

The same with a granny charger, to charge my sons car on the odd time he visits, is very different to charging a car once a week.

But the start point has to be supply type, with a TT supply whole supply will already be RCD protected, and there is no worry about loss of PEN.

With a PME or TN-C-S supply need loss of PEN detection, and may also need a RCD added.

With a TN-S supply, the question is can one really assume it will remain a TN-S, with say the supply to a garage, marina, or caravan site, one could reasonably expect the DNO to tell you if supply is changed to TN-C-S, same when you can see the step down transformer on a pole, but for most people we have to assume it is a TN-C-S supply as it could be changed without telling us.

So post #10 I showed the picture of the loss of PEN detection equipment, that's a lot of work, and raises the question is it worth fitting a granny charger with a TN-C-S supply, or for the small price increase, should you fit a all singing dancing V2G EV charging point?

So to start with, tell us the supply type.
 
Thank you but your reply is way over my head. :)

I'm charging my car once or twice a week with the granny charger about 3/4 hrs at a time.
 
1794841894567.png Often there is a sticker like shown, to tell you the supply type on or near the incomer fuse, is there anything on yours?
 
We can probably tell by looking at photos of the cables in, around and between your incoming supply, meter, and consumer unit.
 
Hello all.
I've just got an PHEV electric car and I can charge the car with the provided Granny Charger, using a standard 13amp socket.

I was going to buy this outside socket..


I can, or my spark can get power to it easy enough, coming for a socket just on the other side of the outside wall, in the living room.

That socket dosen't have an on/off switch, would that matter? I thought like most appliances its best to switch off first before removing the plug.

Unless you can recommend another outside socket.

Thanks in advance.
You don’t need an on off switch,, the BG outdoor socket is a better make than MK imo. Better still hard wire up a dedicated supply from the CU. Hypervolt do options with up to ten metre cable if access is an issue
 
If it were me I'd fit a 2-pole switched FCU inside the house. Apart from allowing you to stop people outside using your power, or tripping your RCD, it also allows you to disconnect it if water gets in and starts tripping your RCD.
 
You don’t need an on off switch,, the BG outdoor socket is a better make than MK imo. Better still hard wire up a dedicated supply from the CU. Hypervolt do options with up to ten metre cable if access is an issue
Thanks. I can’t use a charger like hypervolt because my power is looped supply and I don’t want any digging :). Thanks
 
If it were me I'd fit a 2-pole switched FCU inside the house. Apart from allowing you to stop people outside using your power, or tripping your RCD, it also allows you to disconnect it if water gets in and starts tripping your RCD.
Thank you , yes , thats what I’m planing on doing , it can’t be that difficult to do. Just trying to contact a spark. Thank you.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top