oven hob extractor

[ljstrawson]

Can the new electric oven, gas hob and extractor run on the same supply via a 15mm cable from the fuse box 32amp breaker to a switch on the wall? the oven needs 13amps 3amps for both the hob and extractor.[/img][/list]

 

[holmslaw]

..

 

[ELZ4742]

.edit.

 

[holmslaw]

..

 

[ELZ4742]

.edit.

 

[ELZ4742]

1.5 on a 16Amp

ELZ..your a very good looking lad.

yup, realised after i posted, hense the edit

 

[ban-all-sheds]

Can the new electric oven, gas hob and extractor run on the same supply via a 15mm cable from the fuse box 32amp breaker to a switch on the wall? the oven needs 13amps 3amps for both the hob and extractor.[/img][/list]

1. //www.diynot.com/wiki/electrics:flatpvccables
   
   
2. Bear in mind that the manufacturer(s) might stipulate 13A. 3A etc protection for the appliances.
   
   
3. http://www.tlc-direct.co.uk/Book/6.1.1.htm
   
   
4. http://www.tlc-direct.co.uk/Book/4.3.11.htm
   
   
5. http://www.tlc-direct.co.uk/Book/5.3.1.htm
   
   
6. http://www.tlc-direct.co.uk/Book/4.3.1.htm
   
   
7. //www.diynot.com/wiki/electrics:mcbtocable
   
   
8. http://web.archive.org/web/20080213151445/http://www.kevinboone.com/cableselection_web.pdf
   
   
9. http://www.tlc-direct.co.uk/Technical/Charts/VoltageDrop.html
   
   
10. //www.diynot.com/wiki/electrics:part-p[/list]

 

[holmslaw]

..

 

[ELZ4742]

1.5 on a 16Amp

ELZ..f*** me you're an ugly b*****

 

[ljstrawson]

Sorry I ment 5mm cable.

 

[ELZ4742]

try looking again.. 2.5mm 4mm or 6mm?

 

[ljstrawson]

Lol my bad its got to be 6mm its pretty chunky.

 

[ELZ4742]

then yes, 6mm on a 32a will be fine (on the basis that all your appliances are fused down accordingly)

 

[ljstrawson]

That's great. So would it be possible to wire all 3 into the same fused cooker switch supplied by the 6mm cable?

 

[ELZ4742]

hmmm not sure i completely understand what you are asking?