A fault on the (Zanussi ZCG662GNC) cooker caused the fuse in the 13A plug to pop. Investigated and discovered an 'exploded' capacitor.
Everything seemed to be working, so not sure why a ('smoothing' ?) capacitor is needed.
Anyway, ordered replacement and fitted it. For reasons of inquisitiveness / investigative curiosity, some spades were removed and refitted.
Now, when the main oven is turned on, the ignition on both ovens starts clicking, and won't stop!
I've swapped the spaced terminals over thinking I may have put them back on the wrong terminals (not sure if the outputs from the module are not all the same), but it doesn't make any difference. What have I done?
Any suggestions ... please?
Everything seemed to be working, so not sure why a ('smoothing' ?) capacitor is needed.
Anyway, ordered replacement and fitted it. For reasons of inquisitiveness / investigative curiosity, some spades were removed and refitted.
Now, when the main oven is turned on, the ignition on both ovens starts clicking, and won't stop!
I've swapped the spaced terminals over thinking I may have put them back on the wrong terminals (not sure if the outputs from the module are not all the same), but it doesn't make any difference. What have I done?
Any suggestions ... please?
Last edited: