My daughter ordered a new kitchen + appliances but there wasn't really a option to keep the fridge/freezer separate from the oven.
They are both in their separate 20mm thick units plus a 20-50mm air gap . The filler panel is 100mm x 20mm , Ideally if i have a 20mm air gap then i don't have to trim the filler panel as marked blue on the photo( the actual filler panel will be full height ) . If needed i can also put 20mm celotex or plaster board in the air gap if that will cut down on heat transfer.
Anyone with experience with this set up.
PS: The oven will rarely be used as shes single and loves the air fryer.
They are both in their separate 20mm thick units plus a 20-50mm air gap . The filler panel is 100mm x 20mm , Ideally if i have a 20mm air gap then i don't have to trim the filler panel as marked blue on the photo( the actual filler panel will be full height ) . If needed i can also put 20mm celotex or plaster board in the air gap if that will cut down on heat transfer.
Anyone with experience with this set up.
PS: The oven will rarely be used as shes single and loves the air fryer.
