- Joined
- 23 Feb 2020
- Messages
- 44
- Reaction score
- 0
- Country
Over a year ago we had a wall replastered. It was left to dry for atleast 8 weeks then it was given 2 mist coats. Started emulsioning with no problem at all - using Dulux Trade Emulsion - all good so far. Putting a second coat of emulsion on I noticed in places in bubbles then takes off the 1st coat of emulsion. Anyone expalin why this is happening. It is not doing it everywhere - just random areas, but I have stopped painting the 2nd coat for obvious reasons.
I now have to try and fill in with thin filler where this paint has blown off.
So my question is - I have heard of Zinsser Peel stop which apparently glues down paint edges.
Should I paint this all over the wall? Has anyone used with or without success? Really need some advice please??
Thanks in advance
I now have to try and fill in with thin filler where this paint has blown off.
So my question is - I have heard of Zinsser Peel stop which apparently glues down paint edges.
Should I paint this all over the wall? Has anyone used with or without success? Really need some advice please??
Thanks in advance