Panel Heater Bathroom

[jordanaarno]

Hi all,

Could you please help me. I need to know how to set the timer for the following heater on these images, sorry I don't have any more information.

Untitled

• jordanaarno
• 14 Dec 2011
• 2

Untitled

• jordanaarno
• 14 Dec 2011
• 2

Untitled

• jordanaarno
• 14 Dec 2011
• 2

 

[ban-all-sheds]

There doesn't appear to be a timer....

 

[OwainDIYer]

Looks like the mode switch on the heater selects between off/standby/timed/on settings.

There is probably a separate time/controller - this may be built into one of the heaters or be a separate heating controller.

The heaters probably are controlled by a pilot wire or mains borne signalling from the controller.

 

[jordanaarno]

Looks like the mode switch on the heater selects between off/standby/timed/on settings.

There is probably a separate time/controller - this may be built into one of the heaters or be a separate heating controller.

The heaters probably are controlled by a pilot wire or mains borne signalling from the controller.

Hi, Yes that is correct there are the timed/off/summer/winter/on settings. Hence why I thought there was a timer? Is this not the case.

It is the only heater of its kind they rest are different.

 

[OwainDIYer]

There should be a separate timer.

Maybe there isn't and it's only usable as a standalone heater with manual control.

 

[jordanaarno]

Thanks , so were would I fit and purchase a timer?

 

[flameport]

Assuming the heater is a Dimplex EVS, then this:
http://www.fastlec.co.uk/dimplex-rx9911-pilot-wire-programming-cassette-p-8207.html
is probably the timer you require, it fits into the back of the heater next to the existing controls.