I need some urgent advice im doing an online Pat testing assessment with Napit. Only 10 questions 80% is a pass failed it twice (I could not believe it) lol
I've looked up answers in the Code of Practice book and could not find them. could anyone help with these questions?
Equipment with protective conductor current designed to exceed 3.5mA and supplied with an industrial Plug and socket to BS 60309-2 must have an internal protective conductor of not less than?
Answers:
1.5mm2
0.75mm2
0.50mm2
1.00mm2
When using certain types of test equipment with leads that haven't been nulled, a result can be obtained by carrying out what action on the actual test results?
Answers:
nulled
ignored
decreased
increased
the test instrument used for testing equipment which as non-safety screen
Answers:
an approved test lampwith leads conforming to GS 38
A low current continuity tester with a range of 20mA to 200mA
aA test current no less than 25 A
A test current not less than 1.5 times the fuse rating
Any help would be appreciated
I've looked up answers in the Code of Practice book and could not find them. could anyone help with these questions?
Equipment with protective conductor current designed to exceed 3.5mA and supplied with an industrial Plug and socket to BS 60309-2 must have an internal protective conductor of not less than?
Answers:
1.5mm2
0.75mm2
0.50mm2
1.00mm2
When using certain types of test equipment with leads that haven't been nulled, a result can be obtained by carrying out what action on the actual test results?
Answers:
nulled
ignored
decreased
increased
the test instrument used for testing equipment which as non-safety screen
Answers:
an approved test lampwith leads conforming to GS 38
A low current continuity tester with a range of 20mA to 200mA
aA test current no less than 25 A
A test current not less than 1.5 times the fuse rating
Any help would be appreciated