- Joined
- 29 Nov 2008
- Messages
- 351
- Reaction score
- 29
- Country
Not tiling, but not sure where to post if not here.
I am ordering some Perform Panels of the Nu Lock variety to fit to the walls around my bath which will have a shower over.
https://www.performpanel.co.uk/installation/nu-lock/
1. Can anyone recommend a suitable adhesive to stick these to plasterboard thats had tiles taken off with some old tile adhesive still on the wall. Gripfill green/yellow or something else?
2. Once the bath is in, I plan to just drop the panels on the walls to the bath edge and seal round the bottom with silicone. Would this be ok or better to use strips along the bath to sit the panels on to?
3. Finally, to cut these, i plan on using a circular saw with tct blade. Laminate side face down when cutting to minimise break out. Does that sound OK?
Cheers
I am ordering some Perform Panels of the Nu Lock variety to fit to the walls around my bath which will have a shower over.
https://www.performpanel.co.uk/installation/nu-lock/
1. Can anyone recommend a suitable adhesive to stick these to plasterboard thats had tiles taken off with some old tile adhesive still on the wall. Gripfill green/yellow or something else?
2. Once the bath is in, I plan to just drop the panels on the walls to the bath edge and seal round the bottom with silicone. Would this be ok or better to use strips along the bath to sit the panels on to?
3. Finally, to cut these, i plan on using a circular saw with tct blade. Laminate side face down when cutting to minimise break out. Does that sound OK?
Cheers