Well folks, it's that time again!
Found this in a factory. The photo is of the rear of a heated press machine in a large printing factory.
I had not touched the machine at the time of the photo.
The four sticky out bits are the ends of four heating elements to heat the press plate.
The studs visible on the front of the machine are live and neutral to the elements.
The two loose covers are steel, and supposed to enclose the live parts.
Found this in a factory. The photo is of the rear of a heated press machine in a large printing factory.
I had not touched the machine at the time of the photo.
The four sticky out bits are the ends of four heating elements to heat the press plate.
The studs visible on the front of the machine are live and neutral to the elements.
The two loose covers are steel, and supposed to enclose the live parts.
