Pipe clips for existing pipe

[xyz321]

Hi

Want to put few more clips on 15mm pipe. Ones I saw on Internet were fixed with one central screw. This won't work with an existing pipe as I don't have enough room to be able to put a screw at back. Are there any ones which have two screws at ends so that can go over existing pipe and then screw in?

Ta

 

[sooey]

You could use one side of a double clip then the centre screw will be at the side.

 

[Dextraneous]

Could try this http://www.screwfix.com/p/double-hinge-clip-15mm-pack-of-50/20167

 

[xyz321]

Thanks will give that a go. Not sure if using centre screw on one side only will affect the face with which pipe will be held in place but obviously no other choice so...

Thanks again

 

[Burnerman]

Are saddle band clips any use to you?
John

 

[Dextraneous]

Thanks will give that a go. Not sure if using centre screw on one side only will affect the face with which pipe will be held in place but obviously no other choice so...

Thanks again

Well http://www.screwfix.com/p/hinge-clip-15mm-pack-of-100/19684 clip together, so you could use one either side

 

[buck51]

http://www.screwfix.com/p/talon-pipe-bracket-brass-15mm-pack-of-10/37979

 

[xyz321]

Thank you everyone.