Pipe sleeves
- Thread starter Bazzeruk
- Start date
Sponsored Links
Google 10mm pipe Covers not sleeves, there are loads of them
There are until you try to order them - tried all the links - no stock and no indication of when they will be available.
https://www.toolstation.com/talon-s...BqJRRUuUJ1Los6ZsJ8YApoodNl6vvMgBoCwR8QAvD_BwE
10 packs available for delivery and 1 for collection , just put your post code into that link and you will get information from your local stockists
10 packs available for delivery and 1 for collection , just put your post code into that link and you will get information from your local stockists
Sponsored Links
Thanks - just checking they are suitable for 10 mm as no info on size
Why not put 15mm covers on 10 mm pipes? No one will know the difference as the gap is invisible.
- Joined
- 26 Aug 2016
- Messages
- 6,833
- Reaction score
- 1,010
- Country
If the valve is 10mm entry and you use a15mm sleeve it can be difficult to stop it looking wonky.
To the op I'd be tempted to replace the legs with a short length of copper or even speedfit 10mm is white and looks ok but you might struggle to get less than a 25m roll of it.
To the op I'd be tempted to replace the legs with a short length of copper or even speedfit 10mm is white and looks ok but you might struggle to get less than a 25m roll of it.
Maybe contact these? http://www.radsnaps.com/id31.html Or have you considered painting them?
White tape perhaps?
Tried that - looks awful
Good idea, but they are in bathroom and kitchen under laminate flooring - was done before I moved in
Might try that - thanks
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
