I have a PIR light which has stopped working despite replacing the bulb, so I reckon the sensor is at fault. I want to replace it and as you know all the cables are attached to the new light. However, all my wiring is in place and runs under trunking to the power point. Would I be able to use my present wiring and connect it to the new light please?
PIR Light replacement
- Thread starter hansi
- Start date
Sponsored Links
What?
Are you saying your new light fitting is a sealed unit with a flex already fitted to it?
IF SO, if you don't want to disturb your existing wiring, you could use an outdoor junction box - a Whiska box may do.
Are you saying your new light fitting is a sealed unit with a flex already fitted to it?
IF SO, if you don't want to disturb your existing wiring, you could use an outdoor junction box - a Whiska box may do.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
