I have stripped my bathroom back to the brick in order to plasterboard. Plasterboard delivered today and also timber battens that I thought were 2 x1's. Turns out the battens are only 2 inch x 22mm. I know it's only 3mm difference but this will mean I will have to use 32mm screws and I have seen on various posts that 38mm screws should be used on 12.5mm plasterboard. The questiion I am asking is will I be ok with 32mm screws on the boards which will give 20mm penetration into the battens and if so should I use more than normal. Thanks.
Plasterboard battens and screws
- Thread starter steve.c
- Start date
Sponsored Links
try and pull just one of those screws out.
then imagine trying to pull a herd of 'em out.
32mm will be fine. just be sure they have bitten and pulled against the skin slightly.
then imagine trying to pull a herd of 'em out.
32mm will be fine.
just be sure they have bitten and pulled against the skin slightly.Thanks for the reply Noseall. A little reassurance goes a long way.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
