PLASTERBOARD ON EXTERNAL WALL

Joined
8 Dec 2008
Messages
186
Reaction score
0
Location
Kent
Country
United Kingdom
After some advice please before l proceed.
My conservatory has been dot and dabbed straight onto the exterior wall, and skimmed.
There are areas which feel damp and the plasterboard has gone quite soft.
Should l take it all off back to the brick and seal the brickwork with something, then re board it or build a stud wall in front of it?
Thanks
 

Attachments

  • 20240116_093139.jpg
    20240116_093139.jpg
    258.9 KB · Views: 34
  • 20240116_093127.jpg
    20240116_093127.jpg
    217.7 KB · Views: 28
  • 20240116_093109.jpg
    20240116_093109.jpg
    153.8 KB · Views: 24
Sponsored Links
Better to cure source of damp . Can’t see any conservatory in the photo just a wall.
 
It's the side wall of the conservatory
 

Attachments

  • 20240116_131804.jpg
    20240116_131804.jpg
    306.5 KB · Views: 17
Better to cure source of damp . Can’t see any conservatory in the photo just a wall.
This is where it is the worst. Plasterboard is mush and blockwork is damp. Water could be getting in somewhere. What do you reckon?
 

Attachments

  • 20240116_150225.jpg
    20240116_150225.jpg
    359.2 KB · Views: 43
  • 20240116_122425.jpg
    20240116_122425.jpg
    393.4 KB · Views: 41
  • 20240116_150240.jpg
    20240116_150240.jpg
    337.3 KB · Views: 37
  • 20240116_150341.jpg
    20240116_150341.jpg
    322.5 KB · Views: 40
Sponsored Links
How about photo of property? We all know what damp looks like .
It's the external wall of my conservatory. Been dot and dabbed onto lightweight block, insulation and outer brickwork.
 

Attachments

  • 20240116_160211.jpg
    20240116_160211.jpg
    323.9 KB · Views: 39
It's the external wall of my conservatory. Been dot and dabbed onto lightweight block, insulation and outer brickwork.
Looks like you have a leakage problem from somewhere so that needs to be located and fixed 1st before you think of replacing plasterboard by dot and dabbing or fixing to battens.
 
Looks like the sloppy job done on the parapet wall at roof level is causing all your problems
 
What exactly are you referring to and what should l do to fix it?
The weathering detail at the abutment to the house and window cill looks badly done - doesn’t appear to be lead flashing over the parapet where it meets house

the Conservatory was fitted with a rafter glazing bar next to the wall, rather than a wall / gable glazing bar, leaving a big gap for the lead at the top

something like this would be better


there’s probably no dpc in the parapet wall to stop damp transfer downwards

theres probably no vertical dpc stopping damp travelling across from the front.
 
The weathering detail at the abutment to the house and window cill looks badly done - doesn’t appear to be lead flashing over the parapet where it meets house

the Conservatory was fitted with a rafter glazing bar next to the wall, rather than a wall / gable glazing bar, leaving a big gap for the lead at the top

something like this would be better


there’s probably no dpc in the parapet wall to stop damp transfer downwards

theres probably no vertical dpc stopping damp travelling across from the front.
OK thanks for the input. That goes where the lead is against the wall?
 
The weathering detail at the abutment to the house and window cill looks badly done - doesn’t appear to be lead flashing over the parapet where it meets house

the Conservatory was fitted with a rafter glazing bar next to the wall, rather than a wall / gable glazing bar, leaving a big gap for the lead at the top

something like this would be better


there’s probably no dpc in the parapet wall to stop damp transfer downwards

theres probably no vertical dpc stopping damp travelling across from the front.
So is this bar a complete replacement for the exististing end bar, meaning taking the glass panel out to fit it, or is there an easier way to sort the problem?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top