Polypipe to marley guttering

[Deleted member 123715]

Hi
I have just noticed the stopend on my guttering is cracked.
I tried to detect who was the manufacturer and according to the spare gutter bracket I have it is showing a polypipe logo with the size on the bracket reading 112mm

I have looked on the net for stockists to buy a new end stop and it looks like all the suppliers sell mainly the Marley product range.

Question is can I find a compatible Marley one to fit my Polypie guttering, just in case I struggle to get a polypipe fitting.

Also I have removed the small section of guttering leading up to the stop end and refitted it after inspection, will I now need to buy a new union in case I have now damaged the rubber seals which prevent the 2 joined pieces of guttering, or can I simply ignore this.

Hope I have explained myself properly

Many thanks in advance

Steve

 

[Mw Roofline]

The marley one will fit.

The rubber in the union should be ok, just keep an eye on it.

 

[Deleted member 123715]

Ok many thanks for the quick reply mate
thats a great help
much appreciated

steve

 

[cmother1]

If you want genuine Polypipe Angel Plastics stock it.

 

[Mw Roofline]

Ok many thanks for the quick reply mate
thats a great help
much appreciated

steve

Ok, dont forget to hit that thankyou button.

(Still had none yet, lol )

 

[Deleted member 123715]

Woops didnt realise there was a thankyou button will do right away

thanks also to mother

 

[scotlad]

run a bead of sealant over the rubber seals then wipe excess away when clipped back. if your dubious.