Hi there,
I recently fitted some new taps in my kitchen - lever type monobloc, with flexible connectors. Problem is that the flow is unsatisfactory. There was nothing on the box to say what the minimum pressure was, and I have a gravity system, with about a 3m head.
Is there anything I can do about the flow, or have I bought the wrong taps (i.e. are they most likely designed for a pressurised system)? Would the flexible connectors restrict the flow? The connections are screwed into the bottom of the tap and sealed with an O ring, not compression fittings.
Hope you can help, the wife is giving me grief!
Thanks
I recently fitted some new taps in my kitchen - lever type monobloc, with flexible connectors. Problem is that the flow is unsatisfactory. There was nothing on the box to say what the minimum pressure was, and I have a gravity system, with about a 3m head.
Is there anything I can do about the flow, or have I bought the wrong taps (i.e. are they most likely designed for a pressurised system)? Would the flexible connectors restrict the flow? The connections are screwed into the bottom of the tap and sealed with an O ring, not compression fittings.
Hope you can help, the wife is giving me grief!
Thanks