Pop up waste in basin
- Thread starter palbert
- Start date
Sponsored Links
look on the manufacturers website
or
Fit taps first
one rod should be allready be inplace on the bottom of the waste if not usually the shorter rod screws into the hole at the bottom of the waste.
The other rod slides down the back of the taps, and connects to the rod on the bottom of the waste with the fixing provided, like a little T piece with 2 screws.
u may also have to saw a bit of the waste rod off so that the sink can be flush to the wall.
or
Fit taps first
one rod should be allready be inplace on the bottom of the waste if not usually the shorter rod screws into the hole at the bottom of the waste.
The other rod slides down the back of the taps, and connects to the rod on the bottom of the waste with the fixing provided, like a little T piece with 2 screws.
u may also have to saw a bit of the waste rod off so that the sink can be flush to the wall.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
