I have a Gainsborough 9.5kW SDL electric shower, which no longer produces hot water.
The manual says the causes might be too much flow or no power getting to the shower. It can't be the flow since it's a trickle on the highest setting (and quite powerful on the lowest). I know there's ac at the shower (although I don't know the voltage).
Are there any other likely causes?
The manual says the causes might be too much flow or no power getting to the shower. It can't be the flow since it's a trickle on the highest setting (and quite powerful on the lowest). I know there's ac at the shower (although I don't know the voltage).
Are there any other likely causes?