Can anybody help. My mate has a flamingo boiler that will not start. I have followed the instructions and if I hold the gray knob in the pilot will light and stay on. When I remove my finger the pilot goes out. The pilot is quite weak and looks like it will not reach the thermocouple to heat it up anyway. With winter coming he is starting to panic, having small children.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Potterton Flamingo 50
- Thread starter cbos
- Start date
Time for a man in a van ...... 
Time for a man in a van ......
Thanks for the reply.
From the internet previously looking at starting problems with the Flamingo the symptoms seems to point to the thermocouple. So my mate has already purchased one.Is this a possibility, if I change the thermocouple anyway.
As homer says .............. DOH! 
Thanks for the in depth reply. I might change the thermocouple just for fun, i'll just have to be careful with the asbestos rope. 
I'll ring round tomorrow for a man in a van and see what they come up with.
[/img]
I'll ring round tomorrow for a man in a van and see what they come up with.
[/img]
N
namsag
YES it is asbestos on flamingo`s so damp it down or do what the rest of us have done for years and breath it in because we where told it was an asbestos free substitute and safe
Thanks for the advice
Your opening the combustion chamber which is a major no no. What garauntee to you have that you'll refit it properly and it won't leak POC's (products of combustion) into the property therefore creating a potential health risk namely DEATH. Get a corgi in and he'll sort it and you will not be at risk.
which is a major no no. What garauntee to you have that you'll refit it properly and it won't leak POC's (products of combustion) into the property therefore creating a potential health risk namely DEATH. Get a corgi in and he'll sort it and you will not be at risk.Yawn
Taking your advice and getting a man with a van in.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
