POTTERTON HOUSEWARMER 45

[mick38]

Hoping someone can help me. my boiler has decided to go on strike. engineer has replaced the board, gas valve, ignition, but when we turn it on it still just goes to lock out.
any suggestions welcome.. many thanks.

 

[baxpoti]

Could just be a dirty/blocked pilot!

 

[mick38]

hes checked that so we're at a loss..

 

[baxpoti]

On the PCB check all the connections. The pins can push the indivdual wires out as there pushed in place.

(I know what I mean)!

 

[giblets]

Has the ignition electrode lead been replaced?

 

[Slugbabydotcom]

I recall a similar problem where the small control pcb on the right outer case with the reset button was the culprit. I remember wiring in a seperate reset button which proved the fault was 'what I thought it was' and acted in lieu of the faulty part until the new one arrived.

 

[mick38]

Has the ignition electrode lead been replaced?

which bit is that??