Hi chaps, have a bit of a problem with my ageing Potterton Prima F boiler. It's about 10yrs old now and has worked fine until a few months ago. I started noticing that when the boiler was supposed to start for HW or CH, the fan would start then cut out after a few seconds, a few seconds later the same again, but the fan would go for slightly longer, this would happen for up to 10-15mins before the boiler would finally kick in and heat the water.
However lately, the boiler occasionally doesn't kick in at all, no matter how long I leave it....no hot water.
The plumber I usually use could not find the cause, but he is not a specialist in Potterton, going by the flow chart on the manual he suggests replacing the control panel as a first step.
Anybody out there had any experience of this and can help please?
Tim
However lately, the boiler occasionally doesn't kick in at all, no matter how long I leave it....no hot water.
The plumber I usually use could not find the cause, but he is not a specialist in Potterton, going by the flow chart on the manual he suggests replacing the control panel as a first step.
Anybody out there had any experience of this and can help please?
Tim