Power source for Bathroom Light

[HARD OF WIRING]

I HAVE A 3A FUSED SWITCH CONNECTED TO RING-MAIN AND THIS IS USED FOR A SINGLE WALL-LIGHT,
IS IT POSSIBLE TO RUN ANOTHER LIGHT CABLE FROM THIS FUSED SWITCH TO POWER ANOTHER 'SWITCHED' CUPBOARD LIGHT,
I.E., I DO NOT WANT BOTH LIGHTS TO BE OPERATED BY THE ORIGINAL FUSED SWITCH.

ANY HELP APRECIATED.

 

[Steve]

WE AREN'T HARD OF HEARING DONT SHOUT

and you cant do as you say, you need a seperate switch for the original light.

you can keep the original FCU, and put a new switch in line to the original light. then take a new cable from the load side of the FCU and put a switch in this cable in the same way, then on to the light.