I'm planning to build a garage attached to the side of my house. As luck would have it, the electricity meter (outside) and consumer unit (inside) is on the same house wall the garage will be built on. I wanted to add a couple of sockets and a couple of lights in the garage.
I have space in house consumer unit for 4 RCD or MCB's.
Can I just drill a hole through the wall to feed wiring through?
Also at what height should this be done. e.g head height, low down?
Do I need any particular cable or is standard twin and earth ok?
Once wiring is in garage, can I just feed it through conduit attached to the wall? Again at what height?
Thanks in advance
I have space in house consumer unit for 4 RCD or MCB's.
Can I just drill a hole through the wall to feed wiring through?
Also at what height should this be done. e.g head height, low down?
Do I need any particular cable or is standard twin and earth ok?
Once wiring is in garage, can I just feed it through conduit attached to the wall? Again at what height?
Thanks in advance