pressure washer

[tammo5151]

i will try and keep this simple
i have pulled out the switch connection in my pressure washer and now i dont know what goes where as there is nothing like L for live and n for nuetral just numbers,it is a sachs dolmar hr-100 with 4 slide in connections.anyone out there who knows what i am on about and can help?

 

[Burnerman]

I don't know this machine, but if you have a multimeter / continuity tester you should be able to work it out.....basically, its a two pole switch which means that both the neutral and the live are switched. So, tester on one terminal, click the switch on and find which other terminal connects (there will only be one).
Do the same with the other terminal alongside, and you'll see the opposite one connect. There should be no cross connection between any of the terminals!
John