Priming a screeded floor.

Joined
19 Nov 2013
Messages
28
Reaction score
0
Location
Essex
Country
United Kingdom
I need to prime a screeded floor ready to put the undertile insulation down, any recommended products for this?
 
Sponsored Links
I am using a 150w heating matt, by living heat. It's a 20m2 matt. I am laying on 6mm insulation board(it's blue) think it's called Xps/styrofoam.
Living heat said the screed needs to be primed with a "suitable primer"
I can't use 10mm insulation as it will be too high where it meets bifold doors and hallway.
Any tips/ advise would be greatly appreciated.
Andy
 
Sponsored Links
What type of screed is it? Sand and Cement or Anhydrite/Calcium Sulphate
 
Did the company who supplied the heating mat not supply the primer?

I used another company who sold as a package, I was able to use 10mm insulated backer board instead of 6mm as I have the height.

Have they told you that you need to prime the insulation boards once they are fitted too.

I appreciate you can tile directly on top of the Matt but that seems like a pain to do so I've used a self levelling compound on top of the Matt to make tiling easier.

No help to you I know :)
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top