-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Problems after replacing a pump
- Thread starter scott488
- Start date
had this problem last week....as u have just done...try sticking a hose to a drain valve and open it fast for some 10-20 seconds ...or more i suppose.
the sudden opening of the drain should dislodge air blocks....
close the drain valve and check that rad is getting hot.
u might have to repeat that for all downstairs rads.
(the one i was working on was 10mm microbore which does not help
the sudden opening of the drain should dislodge air blocks....
close the drain valve and check that rad is getting hot.
u might have to repeat that for all downstairs rads.
(the one i was working on was 10mm microbore which does not help
- Joined
- 7 Mar 2005
- Messages
- 51
- Reaction score
- 1
- Country
SZ1301 is Satchwell 2 port spring return valve
After loads of messing around and bleeding of rads, I decided to turn the pump around.......................and hey presto, problem solved!!!
Was almost certain that it was the correct way around in the first place, but there you go........
Was almost certain that it was the correct way around in the first place, but there you go........
fink we telt yow that two pages back 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
