Similar to the previous posting, I am replacing a Bathroom Pull Switch. The old switch (a Crabtree 1 way) has L1 (COM 2 WAY) with RED & GREY Wires, L2 with RED Wire, L3 & L4 have no terminals, EARTH with Green/Yellow Wire & 2 Black Wires into a terminal block. The new switch has L1, L2, COMM and EARTH terminals. Is the correct connection L1 RED; L2 empty; COMM RED & GREY Wires; EARTH Green/Yellow; 2 Blacks into block.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Pull Switch
- Thread starter beast
- Start date
red grey and black.. sound like one red is actually brown sleeved red?
natural red and grey into COM..
sleeved red into L1...
this is wired for a bathroom with a fan that runs on yes?
grey wire will be perm live to fan..
natural red and grey into COM..
sleeved red into L1...
this is wired for a bathroom with a fan that runs on yes?
grey wire will be perm live to fan..
Many Thanks ColJack, and yes you are right the grey goes to a ceiling fan.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
