Pvc door catching at the bottom

[billozz]

I wonder if anyone can help please, pvc door is catching at the bottom I've attached a pic of the hinges if someone could help with how to adjust them.

 

[CountryFan]

Flag style, should be able to lift the round top cap off and the large rectangular piece as well.

 

[crank39]

Height adjustment starts at 1.20sec

The round top cap doesn't do anything, no adjustment there

 

[CountryFan]

The round top cap doesn't do anything, no adjustment there

My apologies, I thought it did

 

[crank39]

It's effectively just a dust cap

 

[billozz]

Thank you so much

 

[billozz]

Can I just ask what the last adjustment was, "compression adjustment"?
Thanks again

 

[crank39]

So when you shut the door it compresses tighter on the rubber gasket, i.e more compression, especially handy if you have dark coloured foiled upvc frames that are South facing as they 'can' bow or cup above and below the hinges, being able to tweak the compression is a plus, not all hinges are 3D adjustable, up down, left right and in and out, the trojan Patriot hinge you have are my favourite hinge, great for adjustment

 

[billozz]

Thank you, so I basically turn the Allen bolt closest to the door frame? Really appreciate your help

 

[crank39]

Yes for height adjustment, the one furthest away from the frame or directly under the hinge pin is for compression

 

[billozz]

Sorry to be as pain but having looked again the door is catching at the bottom front edge, does that need lifting or lateral adjustment, thanks again.

 

[crank39]

Lateral adjustment screw then