Pyronix Active Faults: Wireles Poll Fail

[dsjghdsg]

Hi,

My Pyronix system has a Wireles Poll Fail with every device except for keyfobs. The mobile apps (HomeControl & ProControl) work just fine

So, out of nowhere, of course, at 4 a.m ., my Pyronix enforcer turned on an alarm, waking up everyone. I managed to disarm and clear it by logging into the engineering menu, and restarting the wifi, as the manager menu didn't seem to do anything. Now those faults are coming back over and over again

I moved into this place a few months ago. The system might be at most 10 years old and was serviced, and all batteries were changed less than a year ago.

 

[secureiam]

It’s unlikely all the batteries have failed at the same time.

More likely to be some kind of radio jamming.

You can check the batteries in the mean time.

 

[dsjghdsg]

All issues have now cleared on their own.

What "Wirls Poll Restr" means?

It's daytime, outside, the lamp posts, and inside heating are switched off. I suspect some intereference from light posts or wireless thermostads

 

[secureiam]

yeup radio jamming is likely cause and it resolving. keep an eye on things.

 

[dsjghdsg]

I am trying to understand why the alarm was triggered by the devices being disconnected (jammed).

Is that because those devices decided to enable their own sirens because they were not able to connect to the enforcer, and it was not the enforcer deciding to trigger the sound alarm?

 

[secureiam]

It’s impossible to be certain of the cause.

As it self rectified.

Rather than a possible source of the problem being dealt with and the faults cleared.

detection devices don’t have their own sirens so not sure what you mean by activating their own sirens.