Pyronix Enforcer night set query

[Mechanical Mike]

Pyronix Enforcer installed.
Downstairs sensors and contacts level AB
One landing PIR level A.
Enforcer panel is in cupboard upstairs somewhere so using a wireless arming station keypad in the hall.
The front door contact final exit.
The hall PIR next to it 09
An adjacent room PIR also 09 as it also theoretically might detect me at the arming station.

Problem?

When I come down the stairs the hall PIR spots me and the keypad starts beeping but won't accept the user code until after the alarm has gone off. User code then silences it.

 

[Mechanical Mike]

Any help would be appreciated. I've researched previous posts round this but can't figure out where I've gone wrong.

 

[steveo44]

You need to go to Site Options and make sure Restrict PIN Use option is set to No.

 

[Mechanical Mike]

Thanks, it was already set to no. However the Flex unset was set to 1 so I changed that to 0.
I probably changed it whilst trying to get the wireless keypad to give me level b as an alternative choice.

It seems to work now but got a house full so will try again tonight.

 

[Mechanical Mike]

Seems to be working fine. Thank-you for the help.

 

[andrew jackson]

Hi I have a problem on enforcer wireless
On night set it goes off by its self and won’t
Accept code and no event log
Can anyone help

 

[Europlex]

41`