Pyronix Enforcer wireless keypad

[J_N30]

Guys,

I had my enforcer professional fitted last year and I’d now like to add a wireless keypad. I’ve had a look on MAP Security and the one they sell is for firmware 9.5 and above. Is there a way to tell what my firmware is? Is it relatively easy to pair the new keypad? I do have the engineer code.

Just scoping it out before I have to call him back and pay £££ for it.

Thanks!

 

[BIANCO]

If you have the engineer code its not to hard to do, Off the top of my head there is a way of finding the firmware but for the life of me I cant remember sorry will have a think. All I can suggest is go into the engineers and see if you have a option to learn arming stations, how long have you had it for?.

 

[J_N30]

Was fitted last year.

 

[sparkymarka]

Go into engineering press no, no ect until you get to software version , press yes...to view software version , then no ,no ect.....until exit engineering press yes

 

[J_N30]

Perfect thanks mate. I’ll check it later.

 

[J_N30]

Go into engineering press no, no ect until you get to software version , press yes...to view software version , then no ,no ect.....until exit engineering press yes

I have version 9.52 or something like that so that’s perfect. Thanks for the tip. I can’t get the wireless keypad ordered now.

 

[sparkymarka]

To double check go into engineering and go to wireless devices and there should be an option to add armingstation between devices and bell