pyronix euro mini alarm activated

[coltmanneil]

HI,
I have a Pyronix euro mini panel and system.
When we go to bed we press YES and B.
Lastnight the alarm sounder activated about 4 hours after being armed and the only red led I saw on the screen was " zone B" flashing. It didnt accept the normal 4 digit code. We had to put in the engineers 6 digit code for the alarm to stop.
I couldnt see the tamper fault up or anything else and it looks all clear this morning.
The firm that set it up 5 years ago are no more.
Is there anyway this system leaves a history that can be viewed so we can see what might have caused the problem.

Thanks Neil

 

[sparkymarka]

You shouldnt be able to turn off an alarm when set with an engineer code …. Is that code the master code ? If you press D then master code you can get to view the log

 

[coltmanneil]

Thanks sparkym I’ve retrieved the details from this morning and it’s saying the kitchen sensor activated ( input ) . No idea why it wouldn’t let me accept the alarm with my normal 4 digit code .
Might change the sensor out anyway as the mrs needs the system working when I am away .
I ll open the sensor to see if it’s clean etc .
Thanks again sparkym