M
MarkGibson
Weargas sorry to be a pain but you seem to know a lot about the worcester heatslave 9.24.
I replaced the flow temp sensor on my boiler and its still doing the same thing. hot water running for about 10-15mins and then cutting out.
Just wondering if you can think of anything else it may be?
About 3 years ago had the same problem, took to bits and found that the overheat sensor, next to the pump overrun was loose, tightened it up and its worked ever since then up unitl now that is.
This is what makes me think it could be this sensor thats sending a faulty reading back to the gas valve?
I have ordered a thermometer so I can check the actual temp of the pipework coming out of the heat exchanger to see if it is cutting out genuinely or not.
Any help/advise of you guys is greatly appreciated, and will keep the missus off my back.
Mark
I replaced the flow temp sensor on my boiler and its still doing the same thing. hot water running for about 10-15mins and then cutting out.
Just wondering if you can think of anything else it may be?
About 3 years ago had the same problem, took to bits and found that the overheat sensor, next to the pump overrun was loose, tightened it up and its worked ever since then up unitl now that is.
This is what makes me think it could be this sensor thats sending a faulty reading back to the gas valve?
I have ordered a thermometer so I can check the actual temp of the pipework coming out of the heat exchanger to see if it is cutting out genuinely or not.
Any help/advise of you guys is greatly appreciated, and will keep the missus off my back.
Mark