Hi,
I need to change a bath mixer tap to a bath mixer tap with a shower hose attachment to make a shower that runs off the mixer taps.
The house has Mains cold water and gravity feed hot water. The house is electric only and it has a Direct economy 7 immersion Hot water tank (with the cold water feed tank sitting directly on top of the hot tank)
The Hot water tank sits on the floor of the airing cupboard, same floor as the Bathroom.
The house belongs to a housing association and I'm waiting for permission to carry out the alterations.
As the shower hose attachment would be slightly higher then the top of the cold water feed tank do I need a negative head Pump, or because the mixer taps are below the cold feed tank should it be a Positive Pump?
I really don't want to put a Essex or surrey flange on the tank just in case I damage their property, can anyone recommend a Pump that doesn't require these fittings as part of Manufactures fitting guide?
Was hoping fitting a pump to the gravity feed hot water would also increase flow to Kitchen sink hot and bathroom sink hot too?
Many thanks for reading
I need to change a bath mixer tap to a bath mixer tap with a shower hose attachment to make a shower that runs off the mixer taps.
The house has Mains cold water and gravity feed hot water. The house is electric only and it has a Direct economy 7 immersion Hot water tank (with the cold water feed tank sitting directly on top of the hot tank)
The Hot water tank sits on the floor of the airing cupboard, same floor as the Bathroom.
The house belongs to a housing association and I'm waiting for permission to carry out the alterations.
As the shower hose attachment would be slightly higher then the top of the cold water feed tank do I need a negative head Pump, or because the mixer taps are below the cold feed tank should it be a Positive Pump?
I really don't want to put a Essex or surrey flange on the tank just in case I damage their property, can anyone recommend a Pump that doesn't require these fittings as part of Manufactures fitting guide?
Was hoping fitting a pump to the gravity feed hot water would also increase flow to Kitchen sink hot and bathroom sink hot too?
Many thanks for reading