Radiator Length Help

[gmd]

I'm looking to replace an existing radiator that I have no idea how long it's been installed in the house. It appears to be 1520mm in length (from end to end) and 610mm high.

Would a replacement 1500mm radiator be a suitable replacement without having to alter the pipework (assuming distance from the wall is OK).

 

[sime10]

What pipes are feeding the rad 15mm or microbore?

 

[bster]

you can by extension piesces that will extend the valves if needs be.

 

[Steady]

You should get the 1500 rad and if necessary use an appropriate extension piece - this will save you draining down also .

If you're going to drain the system down first tho' just remake the peipework to the new rad.

Extension pieces:
http://www.bes.ltd.uk/nav_graf/frames_cat.htm

 

[sime10]

Hang on you two, hes from Cardiff he might need me don't tell him too much

 

[Steady]

Apologies for the bad link

You will have to use the link and search under Plumbing/central heating/radiator valves to find the parts required.

 

[sime10]

sssshhhh Steady

 

[sime10]

By the way gmd if you need a plumber my e mail is in my profile

 

[Steady]

loads of work up 'ere in Manchester sime10- no need to chase customers. Traffic's sh*t tho'

 

[sime10]

Not chasing just expanding

 

[gmd]

Thanks for the advice guy's. Any specific hints on what I need to get on the http://www.bes.ltd.uk/ radiator section website

 

[Steady]

On their website do a search for 'radiator extension pieces' and the first hit should say 'diverter valves' or something.
Click on this and look to the bottom of the page for a range of extension pieces.
You will have to work out which type and length suits your situation- depends on whether u are extending a TRV or normal lockshield valve as to which type to use.

The first ones shown (called adjustable) are for extending where the valve is a 3/4" union.

the second ones are for TRV's as it says.

the third type (non adjustable) are for either type of valve.

Hope this helps.

 

[gmd]

Got it, thanks a bunch...

 

[gmd]

Ok, who can tell me where I can find a 1500mm wide radiator.... Everything seems to be either 1400 or 1600mm in length

 

[Nige F]

loads of work up 'ere in Manchester sime10- no need to chase customers. Traffic's sh*t tho'

Come to Sussex then 3 mile Queues EVERY day on the way to Brighton FFS And not much work.......What could I buy for £250k where you are