Any help would be gratefully recieved
I have a ravenheat LS80/100 and for some reason the dhw doesn't work? the central heating works fine. If I have the central heating on and also run the taps at the same time the water is fairly hot but I can only let the water dibble out of the tap. and it takes forever to run a bath, in fact the water pretty much gets cold by the time the bath is run.
I tried turning the temperature down on the thermostat to almost the lowest level and the water was luke warm even though tap was running very slowly. At this point the boiler would fire up and stay fired up.
I tried turning the temp up on the thermostat and the boiler would fire up as per normal but would then cut out after about 20 secs, if I turned the thermstat down again the boiler would fire up again. the water thoughout was still only luke warm???
Is this a problem with the primary heat exchanger? Not really sure were to go with this?
I have a ravenheat LS80/100 and for some reason the dhw doesn't work? the central heating works fine. If I have the central heating on and also run the taps at the same time the water is fairly hot but I can only let the water dibble out of the tap. and it takes forever to run a bath, in fact the water pretty much gets cold by the time the bath is run.
I tried turning the temperature down on the thermostat to almost the lowest level and the water was luke warm even though tap was running very slowly. At this point the boiler would fire up and stay fired up.
I tried turning the temp up on the thermostat and the boiler would fire up as per normal but would then cut out after about 20 secs, if I turned the thermstat down again the boiler would fire up again. the water thoughout was still only luke warm???
Is this a problem with the primary heat exchanger? Not really sure were to go with this?