I need to change the ci oil control valve. Its 4-13cc manual I suppose as it has a knob from off to 6 on it. These you cant get so what would the equivalent bm valve be known as. Is it a bm30 4-13cc manual? I think i could get one or is a toby ok.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Rayburn oil control valve
- Thread starter adypeach
- Start date
- Joined
- 19 Jul 2007
- Messages
- 5,950
- Reaction score
- 1,144
- Country
Get some one who is familiar with vapourising burners to fit it.
Oil depth and fow rates will also need setting.
NOT a DIY job.
Oil depth and fow rates will also need setting.
NOT a DIY job.
BM30 no longer made (shame as it was a very good OCV!!
The Toby is probably the only unit you will get now and they are Cr*p!
But as Terry says it is a job for an experienced engineer who knows how to set up level & flow rate getting wrong can have Very serious consequences!!
The Toby is probably the only unit you will get now and they are Cr*p!
But as Terry says it is a job for an experienced engineer who knows how to set up level & flow rate getting wrong can have Very serious consequences!!
Nowt wrong with Toby except the price!!!
Seriously,though, depth setting is imperative. You should be abre to get one with the correct flow rates as they are now supplied from Aga Rayburn as official spares.
Seriously,though, depth setting is imperative. You should be abre to get one with the correct flow rates as they are now supplied from Aga Rayburn as official spares.
definitely not a DIY job to fit and set up. Pity the BM OCV now discontinued as it was the best by far.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local