Who installed it?
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
RCD Problems on new split load consumer unit
- Thread starter Mike_H
- Start date
Volex CU. Thats low... real low, almost as low as Marbo.
K
kai
I always though Volex CU's were just Wylex ones, with a Volex sticker added to them? 
Thanks Spark, that was exactly the problem. All working fine now. I've learned how to do it....easy when you know innit.
Thanks everybody for your help
Thanks everybody for your help
BUT BUT BUT
You should NOT be installing a split load consumer unit now. It was OK in 2004 but now, if you swop the consumer unit, it should be installed to the current wiring regs
which for most domestic installs
means
dual RCDs or
RCBOs on all circuits. (there are some exceptions, I know).
You should NOT be installing a split load consumer unit now. It was OK in 2004 but now, if you swop the consumer unit, it should be installed to the current wiring regs
which for most domestic installs
means
dual RCDs or
RCBOs on all circuits. (there are some exceptions, I know).
TTC, I think MickkNipfler has left thanks to Spark123 in the wrong thread.
I like the Volex units!!!!!!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
