Hi I recently got water in one of my kitchen sockets which resulted in, I believe, my rcd tripping. My mcb didn't trip.
I switched each mcb one at a time to find yes it is my kitchen circuit. Due to this I replaced the socket in question with a dry one and checked all wiring was dry, however when I switch on the mcb it trips the rcd still.
Would appreciate any advice as this is beyond my basic knowledge or does the mcb need replacing?
Thanks
I switched each mcb one at a time to find yes it is my kitchen circuit. Due to this I replaced the socket in question with a dry one and checked all wiring was dry, however when I switch on the mcb it trips the rcd still.
Would appreciate any advice as this is beyond my basic knowledge or does the mcb need replacing?
Thanks