- Joined
- 28 Feb 2022
- Messages
- 70
- Reaction score
- 1
- Country
Rcd fused spur feeding extension from ring final circuit.
Goes to a 2 gang switch with 1 switch operating 3 downlights and another feeding extractor fan.
Zs, R1+R2 and RCD tests completed and are good.
Problem is that when you leave the lights off for a few days without touching them, when you come back to turn the lights on the rcd has already tripped don’t know when but is strange as there is no loads.
The only thing i can think of is that the rcd fused spur is faulty
Any thoughts?
Goes to a 2 gang switch with 1 switch operating 3 downlights and another feeding extractor fan.
Zs, R1+R2 and RCD tests completed and are good.
Problem is that when you leave the lights off for a few days without touching them, when you come back to turn the lights on the rcd has already tripped don’t know when but is strange as there is no loads.
The only thing i can think of is that the rcd fused spur is faulty
Any thoughts?