RCD Tripping

Joined
2 May 2007
Messages
634
Reaction score
5
Country
United Kingdom
Hi
Hopefully someone can help me, I have a new shed and the previous one had power to a consumer unit inside the shed, there is a join outside. I have moved this and connected it back up but when I flick the shed fuse on the main rcd in the house it trips, none of the consumer unit in the shed is switched on yet.

I am guessing that this would point to a problem maybe in the join? or the cable itself? if the main fuse in the cu is still off this would be a problem before it right?

Just trying to troubleshoot here,

Thanks
 
It could be something simple as a dead short. As above, more information and photos of CU in the shed and definitely the rcd tripping?
 
"there is a join outside. I have moved this and connected it back up but when I flick the shed fuse on the main rcd in the house it trips"

If it did not do it before then it's self inflicted, but I guess you have realised that already. If not check that the wires in the joint are connected to the same colours and you don't have a strand of wire shorting between two cores
I am presuming from your description that you did not disconnect and reconnect the consumer unit as it does not need to be switched on if not connected properly for the rcd to trip. Similarly if you have a neutral to earth short on any of the things connected to it.
 
Last edited:
Even with the test equipment, faults can be a pain to find. Often it is a neutral to earth fault, these depend on how much power is being used, not only by item with the fault, but any other item.

A multi-meter is not much help, unless it has a clamp-on ammeter, and other meters simply cost too much for it to be worth while.

So your only option is trial and error disconnecting all you can, so your as sure as you can be, it is the cable to the shed. Make sure as much as you can is unplugged.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top