Hi guys
I have recently had our electric storage heaters and panel heaters removed as well as our immersion heater tank removed and had a combi boiler fitted with gas central heating.
the storage and panel heaters were not that old just really inefficient.
Each panel heater and storage heater was wired directly to the consumer unit individually using 2.5m cable with each one protected by a 16amp mcb
As all of the wiring and switches are still on the wall for the heaters i was wondering if its ok to replace each of these with a double or single socket.
I was wanting to use of of the circuits as a double socket and then plug in my lcd tv sky box,broadband router,and blueray player using an extension lead.
does this sound ok.
The plumber used the immersion circuit which was also protected with 16amp mcb at the consumer unit to power the combi by connecting it to a fused switch he fitted,can i take a spur from here and connect another double socket to it around 4 meters away.
Thanks in advance for all your help
I have recently had our electric storage heaters and panel heaters removed as well as our immersion heater tank removed and had a combi boiler fitted with gas central heating.
the storage and panel heaters were not that old just really inefficient.
Each panel heater and storage heater was wired directly to the consumer unit individually using 2.5m cable with each one protected by a 16amp mcb
As all of the wiring and switches are still on the wall for the heaters i was wondering if its ok to replace each of these with a double or single socket.
I was wanting to use of of the circuits as a double socket and then plug in my lcd tv sky box,broadband router,and blueray player using an extension lead.
does this sound ok.
The plumber used the immersion circuit which was also protected with 16amp mcb at the consumer unit to power the combi by connecting it to a fused switch he fitted,can i take a spur from here and connect another double socket to it around 4 meters away.
Thanks in advance for all your help