- Joined
- 24 Mar 2018
- Messages
- 22
- Reaction score
- 1
This forum is turning out to be a godsend, so here we go again...
We have some large areas of reinforcement required. Mainly to reassure as much as anything, we have stripped back to bare brick and uncovered some bits that need attention.
Can we use standard rebar with resin, then repainted as standard? As appears to helibar?
It is for internal corners so ideally would like some longer runs, 2m x 1m in a 90 degree bend.
Any steer on this would be really useful.
Many thanks
We have some large areas of reinforcement required. Mainly to reassure as much as anything, we have stripped back to bare brick and uncovered some bits that need attention.
Can we use standard rebar with resin, then repainted as standard? As appears to helibar?
It is for internal corners so ideally would like some longer runs, 2m x 1m in a 90 degree bend.
Any steer on this would be really useful.
Many thanks